Category: Time Synchronisation

Time Synchronization Using the GPS Network

  |   By

The GPS (Global Positioning System) systems has revolutionized navigation for pilots, mariners and drivers a like. Nearly every brand new car is sold with an inbuilt satellite navigation system already installed and similar detachable devices continue to sell in their millions.

Yet the GPS system is a multi purpose tool thanks mainly to the technology it employs to provide navigational information. Each GPS satellite contains an atomic clock which signal is used to triangulate positioning information.

GPS has been around since the late 1970’s but it was only in 1983 that is stopped from being purely a tool of the military and was opened up to allow free commercial access following an accidental shooting down of a passenger airliner.

To utilise the GPS system as a timing reference, a GPS clock or GPS time server is required. These devices usually rely on the time protocol NTP (Network Time Protocol) to distribute the GPS time signal that arrives via the GPS antenna.

GPS time is not the same as UTC (Coordinated Universal Time) which is normally used  NTP for time synchronization via radio transmissions or the internet. GPS time did originally match UTC in 1980 during its inception but sine that time there have been leap seconds added to UTC to counteract the variations of the earth’s rotation, however the on-board satellite clocks are corrected to compensate for the difference between GPS time and UTC, which is 17seconds, as of 2009.

By utilising a GPS time server an entire computer network can be synchronized to within a few milliseconds of UTC ensuring that all computers are safe, secure and able to deal effectively with time sensitive transactions.

Dealing With Time computers synchronisation and timestamps

  |   By

Time is important for the smooth running of our day to day lives. Everything we do is either governed by or restrained because of time. Yet time is even more essential for computer systems as it is the only point of reference a computer has to distinguish between events and processes.

Everything a computer does is logged by the processor with what process was done and exactly when it was carried out. As computers can process hundreds if not thousands of transactions a second so the time stamp is vital for establishing the order of events.

Computers do not read and use the time in the same format that we do. A computer timestamp takes the form of a single digit that counts the number of seconds from a set point in time. In most systems this is known as the ‘prime epoch’ and is set from 00:00:00 UTC on January 1, 1970. So a timestamp for the date 23 June 2009 the timestamp would read: 1246277483 as this is the number of seconds from the prime epoch.

Computer timestamps are sent across networks and the internet, for instance every time an email is sent it is accompanied by a timestamp. When the email is replied to this too comes with a timestamp. Yet, when neither computer is synchronized the replied email could arrive back with an earlier code and this can cause untold confusion for a computer as according to its logs the email will have arrived back before the original was sent.

For this reason computer networks are synchronized to the global timescale UTC (Coordinated Universal Time). UTC is kept true by a constellation of atomic clocks which means that and computer network synchronised to a UTC source will be highly accurate.

Time synchronization on computers is dealt with by the protocol NTP (Network Time Protocol). Special dedicated NTP servers are available the receive a secure time code from either the GPS network or from specialist radio transmissions broadcast by national physical laboratories and then synchronize entire networks to the single time source.

Synchronizing the Time on your Computer

  |   By

Keeping accurate time is essential for many applications and dedicated NTP time servers make the job easy for network administrators. These devices receive an external time signal, often from GPS or sometimes from broadcast signals put out by organisations such as NIST, NPL and PTB (national physics labs from US, UK and Germany).

Synchronization with a NTP time server is made all the more easier thanks to NTP (network time protocol) this software protocol distributes the time source by constantly checking the time on all devices and adjusting any drift to match the time signal that is received.

Time synchronization is not just the concern of large networks. Even single machines and routers ought to be synchronised because at the very least it will help keep a system secure and make error detection a whole lot easier.

Fortunately, most versions of Windows contain a form of NTP. Often it is a simplified version but it is enough to allow a PC to be synchronized with the global time scale UTC (Coordinated Universal Time). On most Windows machines this is relatively easy to do and can be achieved by double clicking on the clock icon in the task bar then selecting a time provider in the internet time tab.

These time sources are internet based meaning that they are external to the firewall so a UDP port has to be left open to allow the time signal to enter. This can cause some security issues so for those wanting perfect synchronization without any security issues then the best solution is to invest in a dedicated time server. These need not be expensive and as they receive an atomic clock time signal externally then here is no breach in the firewall leaving your network secure.

Dangers of Free Time

  |   By

We are all looking for freebies, particularly in the present financial climate and the internet is not short of them. Free software, free films, free music, almost everything these days has a free version. Even critical applications for our computers and networks such as anti-virus can come free. So it is understandable that when network administrators want to synchronize the time on computer networks they turn to free sources of UTC time (UTC – Coordinated Universal Time) to synchronize their networks using the operating systems’ own inbuilt NTP server.

However, just as there is no such thing as a free lunch, free time sources come with a cost too. To start with all time servers on the internet that are available for the public to use are stratum 2 servers. This means they are devices that receive the time from another device (a stratum 1 time server) that gets it from an atomic clock. While this second hand time source shouldn’t lose too much time compared to the original, for high levels of accuracy there will be a noticeable drift.

Furthermore, internet time sources are based outside the network firewall. For access to the time server a UDP port needs to be left open. This will mean the network firewall will intrinsically have a hole in it which could be manipulated y a malicious user or aggressive malware.

Another consideration is the inbuilt security that the time transfer protocol NTP (Network Time Protocol) uses to assess the time signal it receives is genuine. This is referred to as authentication but is unavailable across the internet. Meaning the time source may not be what it claims to be and with a hole in the firewall it could result in a malicious attack.

Internet time sources can also be unreliable. Many are too far from clients to provide any real accuracy some time sources available on the internet are wildly out (some by hours not just minutes). There are however, more reputable stratum 2 servers available and the NTP pool has details of those.

For real accuracy with none of the security threats the best solution is to use an external time source. The best method for doing this is to utilise a dedicated NTP server. These devices work exterior to the firewall and receive the time either direct from GPS satellites or via broadcasts by national physics labs such as NIST or NPL.

A Guide to Using a GPS Clock

  |   By

The Global Positioning System much loved by drivers, pilots and sea-farers as a method of finding location offers much more than just satellite navigation information. The GPS system work by using atomic clocks that broadcast signals that are then triangulated by the computer in a satellite navigation system.

Because these atomic clocks are highly accurate and don’t drift by as much as a second even in a million years, they can be utilised as a method of synchronizing computer systems. GPS time, the time relayed by the GPS atomic clocks, is not strictly speaking the same as UTC (Coordinated Universal Time), the world’s global timescale, but as they are both based on International Atomic Time it can easily be converted. (GPS time is actual 17 seconds slower than UTC as there have been 17 leap seconds added to the global timescale since the GPS satellites where sent in to orbit).

A GPS clock is a device that receives the GPS signal and then translates it into the time. Most GPS clocks are dedicated time servers too as there is little point in receiving the exact time if you are to do nothing with it. GPS time servers use the protocol NTP (Network Time Protocol) which is one of the internet’s oldest protocols and designed to distribute timing information across a network.

A GPS clock, or GPS time server works by receiving a signal directly from the satellite. This unfortunately means the GPS antenna has to have a clear view of the sky to receive a signal. The time is then distributed from the time server to all devices on the network. The time on each device is regularly checked by NTP and if differs to the time from the GPS clock then it is adjusted.

Setting up a GPS clock for time synchronization is relatively easy. The time server (GPS clock) are often designed to fill a 1U space on a server rack. This is connected to the GPS antenna (usually on the roof) via a length of coax cable. The server is connected to the network and once it has locked on to the GPS system it can be set to begin synchronizing the network.

What Atomic Clocks Have Done for Us

  |   By

Atomic clocks, as many people know they are highly accurate devices but the atomic clock is one of the most important inventions of the last 50 years and has given rise to numerous technologies and applications that have completely revolutionized our lives.

You may think how a clock could be so important regardless of how accurate it is, however, when you consider that precision, that a modern atomic clock doesn’t lose a second in time in tens of millions of years when compared to the next best chronometers – electronic clocks – that can lose a second a day you get to realise just how accurate they are.

In fact, atomic clocks have been crucial in identifying the smaller nuances of our world and the universe. For instance we have for millennia assumed that a day is 24 hours long but in fact, thanks to atomic clock technology we now know that the length of each day slightly differs and in general the earth’s rotation is slowing down.

Atomic clocks have also been used to accurately measure the earth’s gravity and have even proved Einstein’s theories of how gravity can slow time by accurately measuring the difference in the passing of time at each subsequent inch above the earth’s surface. This has been crucial when it comes to placing satellites in orbit as time passes quicker that high above the earth than it does on the ground.

Atomic clocks also form the basis for many of the technologies that we employ in our day to day lives. Satellite navigation devices rely on atomic clocks in GPS satellites. Not only do they have to take into account the differences in time above the orbit but it as sat navs use the time sent from the satellites to triangulate positions, a one-second inaccuracy would see navigational information inaccurate by thousands of miles (as light travels nearly 180,000 miles every second).

Atomic clocks are also the basis for the world’s global timescale – UTC (Coordinated Universal Time), which is utilised by computer networks throughout the world. Time synchronization to an atomic clock and UTC is relatively straight forward with a NTP time server. These use the time signal from the GPS system or special transmissions broadcast from large scale physics labs and then distribute it across the internet using the time protocol NTP.

The Sat Nav How it Works

  |   By

The ‘sat-nav’ has revolutionised the way we travel. From taxi drivers, couriers and the family car to airliners and tanks, satellite navigation devices are now fitted in almost every vehicle as it comes off the production line. While GPS systems certainly have their flaws, they have several uses too. Navigation is just one of the main uses of GPS but it is also employed as a source of time for GPS NTP time servers.

Being able to pin point locations from space has saved countless lives as well as making travelling to unfamiliar destinations trouble free. Satellite navigation relies on a constellation of satellites known as GNSS (Global Navigational Satellite Systems). Currently there is only one fully functioning GNSS in the world which is the Global Positioning System (GPS).

GPS is owned and run by the US military. The satellites broadcast two signals, one for the American military and one for civilian use. Originally, GPS was meant solely for the US armed forces but following an accidental shooting down of an airliner, the then President of the US Ronald Reagan opened the GPS system to the world’s population to prevent future tragedies.

GPS has a constellation of over 30 satellites. At any one time at least four of these satellites are overhead, which is the minimum number required for accurate navigation.

The GPS satellites each have onboard an atomic clock. Atomic clocks use the resonance of an atom (the vibration or frequency at particular energy states) which makes them highly accurate, not losing as much as a second in time over a million years. This incredible precision is what makes satellite navigation possible.

The satellites broadcast a signal from the onboard clock. This signal consists of the time and the position of the satellite. This signal is beamed back to earth where your car’s sat nav retrieves it. By working out how long this signal took to reach the car and triangulating four of these signals the computer in your GPS system will work out exactly where you are on the face of the world.  (Four signals are used because of elevation changes – on a ‘flat’ earth only three would be required).

GPS systems can only work because of the highly precise accuracy of the atomic clocks. Because the signals are broadcast at the speed of light and accuracy of even a millisecond (a thousandth of a second) could alter the positioning calculations by 100 kilometres as light can travel nearly 100,00km each and every second –currently GPS systems are accurate to about five metres.

The atomic clocks onboard GPS systems are not just used for navigation either. Because atomic clocks are so accurate GPS makes a good source of time. NTP time servers use GPS signals to synchronize computers networks to. A NTP GPS server will receive the time signal from the GPS satellite then convert it to UTC (Coordinated Universal Time) and distribute it to all devices on a network providing highly accurate time synchronization.

Do I Really Need an NTP Time Server?

  |   By

The NTP time server is a much misunderstood piece of equipment. They are quite simple devices in the sense that they are used for the purposes of time synchronisation, receiving an external source of the time which is then distributed throughout a computer network using NTP (Network Time Protocol).

However, with a myriad of ‘free’ time servers available on the internet many network administrators take the decision that NTP time servers are not necessary pieces of equipment and that their network can do without it. However, there are a huge number of pitfalls in relying on the internet as a time reference; Microsoft and the USA physics laboratory NIST (National Institute of Standards and Time) highly recommend external NTP time servers rather than internet providers.

Here is what Microsoft says:
“We highly recommend that you configure the authoritative Time Server to gather the time from a hardware source. When you configure the authoritative Time Server to sync with an Internet time source, there is no authentication.”

Authentication is a security measure implemented by NTP to ensure that the time signal that is sent comes from where it claims to come from. In other words authentication is the first line of defence in protecting against malicious users. There are other security issues too with using the internet as a time source as any communication with an internet time source is going to require the TCP/IP port to be left open in the firewall this could also be manipulated by malicious users.

NIST too recognise the importance of NTP time server systems for prevention and detection of security threats in their Guide to Computer Security Log Management they suggest:
“Organizations should use time synchronization technologies such as Network Time Protocol (NTP) servers whenever possible to keep log sources’ clocks consistent with each other.”

The Measuring of Time

  |   By

Measuring the passing of time has been a preoccupation of humans since the dawn of civilization. Broadly speaking, measuring time involves using some form of repetitive cycle to work out how much time has passed. Traditionally this repetitive cycle has been based on the movement of the heavens such as a day being a revolution of the Earth, a month being an entire orbit of the Earth by the moon and a year being earth’s orbit of the sun.

As our technology progressed we have been able to measure time in smaller and smaller increments from sundials that allowed us to count the hours, mechanical clocks that let us monitor the minutes, electronic clocks that let is for the first time accurately record seconds to the current age of atomic clocks where time can be measured to the nanosecond.

With the advancement in chronology that has led to technologies such as NTP clocks, time servers, atomic clocks, GPS satellites and modern global communications, comes with another conundrum: when does a day start and when does it finish.

Most people assume a day is 24 hours long and that it runs from midnight to midnight. However, atomic clocks have revealed to us that a day is not 24 hours and in fact the length of a day varies (and is actually increasing gradually over time).

After atomic clocks were developed there was a call from many sectors to come up with a global timescale. One that uses the ultra precise nature of atomic clocks to measure its passing but also one that takes into account the Earth’s rotation. Failing to account for the variable nature of a day’s length would mean any static timescale would eventually drift with day slowly drifting into night.

To compensate for this the world’s global timescale, called UTC (coordinated universal time) has additional seconds added (leap seconds) to ensure that there is no drift. UTC time is kept true by a constellation of atomic c clocks and it is utilised by modern technologies such as the NTP time server which ensures computer networks all run  the exact same precise time.