Posts by: Stuart

Worlds Most Famous Clock Reaches 150

  |   By

It’s one of the world’s most iconic land marks. Standing proudly over the Houses of Parliament, Big Ben celebrates its 150th birthday. Yet despite living in an age of atomic clocks and NTP time servers, it is one of the most used timepieces in the world with hundreds of thousands of Londoners relying on its chimes to set their watches to.

Big Ben is actually the name of the main bell inside the clock that creates the quarter hourly chimes but the bell didn’t start chiming when the clock was first built. The clock began keeping time on 31 May 1859, while the bell didn’t strike for the first time until July 11.

Some claim the twelve tonne bell was named after Sir Benjamin Hall the Chief Commissioner of Works who worked on the clock project (and was said to be a man of great girth). Others claim the bell was named after heavyweight boxer Ben Caunt who fought under the moniker Big Ben.

The five-tonne clock mechanism works like a giant wristwatch and is wound three times a week. Its accuracy if in tuned by adding or removing old pennies on the pendulum which is quite far removed from the accuracy that modern atomic clocks and NTP server systems generate with near nanosecond precision.

While Big Ben is trusted by tens of thousands of Londoners to provide accurate time, the modern atomic clock is used by millions of us every day without realising it. Atomic clocks are the basis for the GPS satellite navigation systems we have in our cars they also keep the internet synchronised by way of the NTP time server (Network Time Protocol).

Any computer network can be synchronised to an atomic clock by using a dedicated NTP server. These devices receive the time from an atomic clock, either via the GPS system or specialist radio transmissions.

MSF Outage 11 June NPL Maintenance

  |   By

The UK’s MSF signal broadcast from Anthorn, Cumbria and utilised by UK NTP server users is be turned off for a four hour period on 11 June for scheduled maintenance. The MSF 60 kHz time and frequency standard will be off between 10.00 and 14:00 BST (9:00 – 13:00 UTC).

Users of NTP time servers that utilise the MSF signal should be aware of the outage but shouldn’t panic. Most network time servers that use the Anthorn system should still function adequately and the lack of a timing signal for four hours should not create any synchronisation problems or clock drift.

However, any testing of time servers that utilise MSF should be conducted before or after the scheduled outage. Further information is available from NPL.

Any network time server users that require ultra-precise precision or are feel temporary loss of this signal could cause repercussions in their time synchronisation should seriously consider utilising the GPS signal as an additional means of receiving a time signal.

GPS is available literally anywhere on the planet (as long as there is a good clear view of the sky) and is never down due to outages.

For further information on GPS NTP server can be found here.

The NTP Time Server Essential Network Protection

  |   By

There are a myriad of hardware and software methods of protecting computers. Anti-virus software, firewalls, spyware and routers to name but a few yet perhaps the most important tools for keeping a network safe is often the most overlooked.

One of the reasons for this is that the network time server’s often referred to as the NTP time server (after the protocol Network Time Protocol) primary task is time synchronisation and not security.

The NTP server’s primary task is to retrieve a time signal from a UTC source (Coordinated Universal Time) which it then distributes it amongst the network, checking the clock on each system device and ensuring its running in synchronisation with UTC.

Here is where many network administrators fall down. They know that time synchronisation is vital for computer security. Without it, errors can not be logged (or even spotted) network attacks can’t be countered, data can be lost and if a malicious user does get into the system it is near impossible to discover what they were up to without all machines on a network corresponding to the same time.

However, the NTP server is where many network administrators think they can save a little money. ‘Why bother?’ ‘They say, ‘when you can log on to an Internet NTP server for free.’

Well, as the old saying goes there is no such thing as a free lunch or as it goes a free source of UTC time. Using internet time providers may be free but this is where many computer networks leave themselves open to abuse.

To utilise an internet source of time such as Microsoft’s, NIST or one of those on the NTP pool project may be free but they are also outside a networks firewall and these is where many network administrators come unstuck.

Bringing Atomic Clock Precision to your Desktop

  |   By

Atomic clocks have been a huge influence on our modern lives with many of the technologies that have revolutionised the way we live our lives relying on their ultra precise time keeping abilities.

Atomic clocks are far different to other chronometers; a normal watch or clock will keep time fairly accurately but will lose second or two each day. An atomic clock on the other hand will not lose a second in millions of years.

In fact it is fair to say that an atomic clock doesn’t measure time but is the foundations we base our perceptions of time on. Let me explain, time, as Einstein demonstrated, is relative and the only constant in the universe is the speed of light (though a vacuum).

Measuring time with any real precision is therefore difficult as even the gravity on Earth skews time, slowing it down. It is also almost impossible to base time on any point of reference. Historically we have always used the revolution of the earth and reference to the celestial bodies as a basis for our time telling (24 hours in a day = one revolution of the Earth, 365 days = one revolution of the earth around the Sun etc).

Unfortunately the Earth’s rotation is not an accurate frame of reference to base our time keeping on. The earth slows down and speeds up in its revolution meaning some days are longer than others.

Atomic clocks however, used the resonance of atoms (normally caesium) at particular energy states. As these atoms vibrate at exact frequencies (or an exact number of times) this can be used as a basis for telling time. So after the development of the atomic clock the second has been defined as over 9 billion resonance ’ticks’ of the caesium atom.

The ultra precise nature of atomic clocks is the basis for technologies such as satellite navigation (GPS), air traffic control and internet trading. It is possible to use the precise nature of atomic clocks to synchronise computer networks too. All that is needed is a NTP time server (Network Time Protocol).
NTP servers receive the time from atomic clocks via a broadcast signal or the GPS network they then distribute it amongst a network ensuring all devices have the exact same, ultra precise time.

Essentials of Traffic Management NTP Server

  |   By

There are now reportedly as many cars on the road as there are households and it only takes a brief journey during rush hour to realise that this claim is quite possibly true.

Congestion is a huge problem in our towns and cities and controlling this traffic and keeping it moving is one of the most essential aspects of reducing congestion. Safety is also a concern on our roads as the chances of all those vehicles travelling around without occasionally hitting each other is close to zero but the problem can be exemplified by poor traffic management.

When it comes to controlling the traffic flows of our cities there is no greater weapon than the humble traffic light. In some cities these devices are simple timed lights that stop traffic one way and allow it the other and vice versa.

However, the potential of how traffic lights can reduce congestion is now being realised and thanks to the millisecond synchronisation made possible with NTP servers is now drastically reducing congestion is some of the world’s major cities.

Rather than just simple timed segments of green, amber and red, traffic lights can respond to the needs of the road, allowing more cars through in one direction whilst reducing it in others. They can also be used in conjunction with each other allowing green light passageways for cars in main routes.

However, all this is only possible if the traffic lights system throughout the whole city is synchronised together and that can only be achieved with a NTP time server.

NTP (Network Time Protocol) is simply an algorithm that is widely used for the purposes of synchronisation. A NTP server will receive a time signal from a precise source (normally an atomic clock) and the NTP software then distributes it amongst all devices on a network (in this case the traffic lights).

The NTP server will continually check the time on each device and ensure it corresponds to the time signal, ensuring all devices (traffic lights) are perfectly synchronised together allowing the entire traffic light system to be managed as a single, flexible traffic management system rather than individual random lights.

Increased Accuracy of Dual NTP Server Systems

  |   By

The NTP time server has revolutionised the synchronisation of computer networks over the last twenty years. NTP (Network Time Protocol) is the software  that  is responsible for distributing time from the time server to the entire network, adjusting machines for drift and assuring accuracy.

NTP can reliable maintain system clocks to within a few millimetres of UTC (Coordinated Universal Time) or whatever timescale it is fed with.

However NTP can only be as reliable as the time source that it receives and as UTC  is the global civil timescale it depends on where the UTC source comes from.

National time and frequency transmissions from physics labs like NIST in the USA or NPL in the UK are extremely reliable sources of UTC and NTP time servers are designed specifically for them. However, the time signals are not guaranteed, they can drop off throughout the day and are susceptible to interference; they are also regularly turned of for maintenance.

For most applications a few hours of your network relying on crystal oscillators will probably not cause too much problems in synchronisation. However, GPS (Global Positioning System) is far more reliable source for UTC time in that a GPS satellite is always overhead. They do require a line-of-sight reception which means an antenna has to go on the roof or outside an open window.

For applications where accuracy and reliability are essential the safest solution is to invest in a dual system NTP time server, these device can receive both the radio transmissions such  as MSF, DCF-77 or WWVB and the GPS signal.

On a dual system NTP server, NTP will take both time sources and to synchronise a network to ensuring increased accuracy and reliability.

GPS Time Server and its Accuracy from space

  |   By

The GPS network (Global Positioning System), is commonly known as a satellite navigation system. It however, actually relays a ultra-precise time signal from an onboard atomic clock.

It is this information that is received by satellite navigation devices that can then triangulate the position of the receiver by working out how long the signal has taken to arrive from various satellites.

These time signals, like all radio transmissions travel at the speed of light (which is close to 300,000km a second). It is therefore highly important that these devices are not just accurate to a second but to a millionth of a second otherwise the navigation system would be useless.

It is this timing information that can be utilized by a GPS time server as a base for network time. Although this timing information is not in a UTC format (Coordinated Universal Time), the World’s global timescale, it easily converted because of its origin from an atomic clock.

A GPS time server can receive the signal from a GPS aerial although this does need to have a good view of the sky as the satellites relay their transmissions via line-of-sight.
Using a dedicated GPS time server a computer network can be synchronised to within a few milliseconds of NTP (milli=1000th of a second) and provide security and authentication.

Following the increase use of GPS technology over the last few years, GPS time servers are now relatively inexpensive and are simple and straight forward systems to install.

Next Generation of Accurate Atomic Clocks Starts Ticking as NIST scientists unveil new strontium clock

  |   By

Those chronological pioneers at NIST have teamed up with the University of Colorado and have developed the world’s most accurate atomic clock to date. The strontium based clock is nearly twice as accurate as the current caesium clocks used to govern UTC (Coordinated Universal Time) as it loses just a second every 300 million years.

Strontium based atomic clocks are now being seen as the way forward in timekeeping as higher levels of accuracy are attainable that are just not possible with the caesium atom. Strontium clocks, like their predecessors work by harnessing the natural yet highly consistent vibration of atoms.

However, these new generations of clocks use laser beams and extremely low temperatures close to absolute zero to control the atoms and it is hoped it is a step forward to creating a perfectly precise clock.

This extreme accuracy may seem a step too far and unnecessary but the uses for such precision are many fold and when you consider the technologies that have been developed that are based on the first generation of atomic clocks such as GPS navigation, NTP server synchronisation and digital broadcasting a new world of exciting technology based on these new clocks could just be around the corner.

While currently the world’s global timescale, UTC, is based on the time told by a constellation of caesium clocks (and incidentally so is t he definition of a second as just over 9 billion caesium ticks), it is thought that when the Consultative Committee for Time and Frequency at the Bureau International des Poids et Mesures (BIPM) next meets it will discuss whether to make these next generation of atomic clocks the new standard.

However, strontium clocks are not the only method of highly precise time. Last year a quantum clock, also developed at NIST managed accuracy of 1 second in 1 billion years. However, this type of clock can’t be directly monitored and requires a more complex scheme to monitor the time.

Receiving the Time and Finding the Correct Time Source

  |   By

So you have decided to synchronize your network to UTC (Coordinated Universal Time), you have a time server that utilizes NTP (Network Time Protocol) now the only thing to decide on is where to receive the time from.

NTP servers do not generate time they simply receive a secure signal from an atomic clock but it is this constant checking of the time that keeps the NTP server accurate and in turn the network that it is synchronizing.

Receiving an atomic clock time signal is where the NTP server comes into its own. There are many sources of UTC time across the Internet but these are not recommended for any corporate use or for whenever security is an issue as internet sources of UTC are external to the firewall and can compromise security – we will discuss this in more detail in future posts.

Commonly, there are two types of time server. There are those that receive an atomic clock source of UTC time from long wave radio broadcasts or those that use the GPS network (Global Positioning System) as a source.

The long wave radio transmissions are broadcast by several national physics laboratories. The most common signals are the USA’s WWVB (broadcast by NIST – National Institute for Standards and Time), the UK’s MSF (broadcast by the UK National Physical Laboratory) and the German DCF signal (Broadcast by the German National Physics Laboratory).

Not every country produces these time signals and the signals are vulnerable to interference from topography. However, in the USA the WWVB signal is receivable in most areas of North America (including Canada) although the signal strength will vary depending on local geography such as mountains etc.

The GPS signal on the other hand is available literally everywhere on the planet as along as the GPS antenna attached to the GPS NTP server can have a clear view of the sky.

Both systems are a truly reliable and accurate method of UTC time and using either will allow synchronization of a computer network to within a few milliseconds of UTC.

The Body Clock Natures Own NTP Server

  |   By

Developing new methods of telling the time accurately and precisely has developed to a new obsession amongst chronologists in the twenty first century. Since the development of the first atomic clocks in the 1950’s with millisecond accuracy the race was started with organisation such as the US’s NIST (National Institute for Standards and Time) and the UK’s NPL (National Physical Laboratory) developing increasingly accurate atomic clocks.

Atomic clocks are used as the time source for high technologies and applications such as satellite navigation and air traffic control, they are also the source for time signals used by NTP servers to synchronise computer networks.

An NTP server works by continually adjusting the computers system clock to ensure it matches the time relayed by the atomic clock. In doing this the NTP server can keep a computer network to within a few milliseconds of atomic clock controlled UTC (Coordinated Universal Time).

However, as remarkable this technology may seem it appears Mother Nature has already been doing the very same thing with our own body clocks.

The human body clock is only just being understood by medical science (the study of which is called Chronobiology) but what is known is that the body clock extremely important in the functioning of our day to day lives; it is also highly accurate and works in a very similar way to the NTP server.

Whilst a NTP time server receives a time signal from an atomic clock and adjust the system clocks on computers to match, our body clocks do the very same thing. The body clock runs in a circadian rhythm in other words a 24 hour clock. When the sun rises in the morning part of the brain that governs the body clock called the suprachiasmatic nucleus – which is located in the brain’s hypothalamus, automatically corrects for the sun’s movement.

In this way the human body clock adjusts for the darker winters and lighter months of the summer which is why you may find it more difficult to wake in the winter. The body clock adjusts itself every day to ensure it is synchronised to the rotation of the sun just as a NTP time server synchronises a computer’s system clock to ensure it is running accurately  to its timing source – the atomic clock.