The caesium atomic clock has become the foundation of our time – literally. The International System of Units (SI) define a second as a certain number of oscillations of the atom caesium and atomic clocks govern many of the technologies that we live with an use on a daily basis: The internet, satellite navigation, air traffic control and traffic lights to name but a few.

However, recent developments in optical quantum clocks that use single atoms of metals like aluminium or strontium are thousands of times more accurate than traditional atomic clocks. To put this in perspective, the best caesium atomic clock as used by institutes like NIST (National Institute for Standards and Time) or NPL (National Physical Laboratory) to govern the world’s global timescale UTC (Coordinated Universal Time), is accurate to within a second every 100 million years. However, these new quantum optical clocks are accurate to a second every 3.4 billion years – almost as long as the earth is old.

For most people, their only encounter with an atomic clock is receiving its time signal is a network time server or NTP device (Network Time Protocol) for the purposes of synchronising devices and networks and these atomic clock signals are generated using caesium clocks.

And until the world’s scientists can agreed on a single atom to replace caesium and a single clock design for keeping UTC, none of us will be able to take advantage of this incredible accuracy.

Quantum Atomic Clocks – The precision of the future is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

Atomic clocks are the most accurate chronometers we have. They are millions of times more accurate than digital clocks and can keep time for hundreds of millions of years without losing as much as a second. Their use has revolutionised the way we live and work and they have enabled technologies such as satellite navigation systems and global online commerce.

But how do they work? Strangely enough, atomic clocks work in the same way as ordinary mechanical clocks. But rather than have a coiled spring and mass or pendulum they use the oscillations of atoms. Atomic clocks are not radioactive as they do not rely on atomic decay instead they rely on the tiny vibrations at certain energy levels (oscillations) between the nucleus of an atom and the surrounding electrons.

When the atom receives microwave energy at exactly the right frequency, it changes energy state, this state is constant an unchanging and the oscillations can be measured just like the ticks of a mechanical clock. However, while mechanical clocks tick every second, atomic clocks ‘tick’ several billion times a second. In the case of caesium atoms, most commonly used in atomic clocks, they tick 9,192,631,770 per second – which is now the official definition of a second.

Atomic clocks now govern the entire global community as a universal timescale UTC (Coordinated Universal Time) based on atomic clock time has been developed to ensure synchronization. UTC atomic clock signals can be received by network time servers, often referred to as NTP Servers, that can synchronize computer networks to within a few milliseconds of UTC.

The Way an Atomic Clock Works is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

From time dilation to the effects of gravity on time, time has many weird and wonderful facets that scientists are only beginning to understand and utilise. Here are some interesting, weird and unusual facts about time:

•    Time is not separate from space, time makes up what Einstein called four dimensional space time. Space time can be warped by gravity meaning that time slows down the greater the gravitational influence.  Thanks to atomic clocks, time on earth can be measured at each subsequent inch above the earth’s surface. That means that every bodies feet are younger than their head as time runs slower the lower to the ground you get.

•    Time is also affected by speed. The only constant in the universe is the speed of light (in a vacuum) which is always the same. Because of Einstein’s famous theories of relativity anybody travelling at close to the speed of light a journey to an observer that would have taken thousands of years would have passed within seconds. This is called time dilation.

•    There is nothing in contemporary physics that prohibits time travel both forward and backwards in time.

•    There are 86400 seconds in a day, 600,000 in a week, more than 2.6 million in a month and more than 31 million in a year. If you live to be 70 years old then you will have lived through over 5.5 billion seconds.

•    A nanosecond is a billionth of a second or roughly the time it takes for light to travel about 1 foot (30 cm).

•    A day is never 24 hours long. The earth’s rotation is speeding up gradually which means the global timescale UTC (coordinated universal time) has to have leap seconds added once or twice a year. These leap seconds are automatically accounted for in any clock synchronization that uses NTP (Network Time Protocol) such as a dedicated NTP time server.

Facts of Time is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

Researchers at the Physikalisch-Technische Bundesanstalt (PTB) in Germany are using use new methods of spectroscopy to investigate atomic and molecular systems and hope to develop a clock based around a single aluminium atom.

Most atomic clocks used for satellite navigation (GPS), as references for computer network NTP servers and air traffic control have traditionally been based on the atom caesium.  However, the next generation of atomic clocks, such as the one unveiled by NIST which is claimed to be accurate to within a second every 300 million years, uses the atoms from other materials such as strontium which scientists claim can be potentially more accurate than caesium.

Researchers at PTB have opted to use single aluminium atoms and believe they are on the way to developing the most accurate clock ever and believe there is huge potential for such a device to help us understand some of the more complicated aspects of physics.

The current crop of atomic clocks allow technologies such as satellite navigation, air traffic control and network time synchronisation using NTP servers but it is believed the increases accuracy of the next generation of atomic clocks could be used to reveal some of the more enigmatic qualities of quantum science such as string theory.

Researchers claim the new clocks will provide such accuracy they will even be able to measure the minute differences in gravity to within each centimetre above sea-level.

Germans Enter Race to Build the World’s Most Accurate Clock is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

Since the beginning of the twentieth century mankind has been obsessed with atoms and the minutiae of our universe. Much of the first part of the last century, mankind became obsessed with harnessing the hidden power of the atom, revealed to us by the work of Albert Einstein and finalised by Robert Oppenheimer.

However, there has been much more to our exploration of the atom than just weapons. The studying of the atoms (quantum mechanics) has been at the root of most of our modern technologies such as computers and the Internet.  It is also in the forefront of chronology – the measuring of time.

The atom plays a key role in both timekeeping and time prediction. The atomic clock, which is utilised all over the world by computer networks using NTP servers and other technical systems such as air traffic control and satellite navigation.

Atomic clocks work by monitoring the extremely high frequency oscillations of individual atoms (traditionally caesium) that never changes at particular energy states. As caesium atoms resonate over a 9 billion times every second and never alters it its frequency it makes the m highly accurate (losing less than a second every 100 million years)

But atoms can also be used to work out not just accurate and precise time but they can also be utilised in establishing the age of objects. Carbon dating  is the name given to this method which measures the natural decay of carbon atoms. All of us are made primarily of carbon and like other elements carbon ‘decays’ over time where the atoms lose energy by emitting ionizing particles and radiation.

In some atoms such as uranium this happens very quickly, however, other atoms such as iron are highly stable and decay very, very slowly. Carbon, while it decays quicker than iron is still slow to lose energy but the energy loss is exact over time so by analysing carbon atoms and measuring their strength it can be quite accurately ascertained when the carbon originally formed.

The Atom and Time keeping is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

Atomic clocks are far different to other chronometers; a normal watch or clock will keep time fairly accurately but will lose second or two each day. An atomic clock on the other hand will not lose a second in millions of years.

In fact it is fair to say that an atomic clock doesn’t measure time but is the foundations we base our perceptions of time on. Let me explain, time, as Einstein demonstrated, is relative and the only constant in the universe is the speed of light (though a vacuum).

Measuring time with any real precision is therefore difficult as even the gravity on Earth skews time, slowing it down. It is also almost impossible to base time on any point of reference. Historically we have always used the revolution of the earth and reference to the celestial bodies as a basis for our time telling (24 hours in a day = one revolution of the Earth, 365 days = one revolution of the earth around the Sun etc).

Unfortunately the Earth’s rotation is not an accurate frame of reference to base our time keeping on. The earth slows down and speeds up in its revolution meaning some days are longer than others.

Atomic clocks however, used the resonance of atoms (normally caesium) at particular energy states. As these atoms vibrate at exact frequencies (or an exact number of times) this can be used as a basis for telling time. So after the development of the atomic clock the second has been defined as over 9 billion resonance ’ticks’ of the caesium atom.

The ultra precise nature of atomic clocks is the basis for technologies such as satellite navigation (GPS), air traffic control and internet trading. It is possible to use the precise nature of atomic clocks to synchronise computer networks too. All that is needed is a NTP time server (Network Time Protocol).

NTP servers receive the time from atomic clocks via a broadcast signal or the GPS network they then distribute it amongst a network ensuring all devices have the exact same, ultra precise time.

NTP Server – Bringing Atomic Clock Precision to your Desktop is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

Strontium based atomic clocks are now being seen as the way forward in timekeeping as higher levels of accuracy are attainable that are just not possible with the caesium atom. Strontium clocks, like their predecessors work by harnessing the natural yet highly consistent vibration of atoms.

However, these new generations of clocks use laser beams and extremely low temperatures close to absolute zero to control the atoms and it is hoped it is a step forward to creating a perfectly precise clock.

This extreme accuracy may seem a step too far and unnecessary but the uses for such precision are many fold and when you consider the technologies that have been developed that are based on the first generation of atomic clocks such as GPS navigation, NTP server synchronisation and digital broadcasting a new world of exciting technology based on these new clocks could just be around the corner.

While currently the world’s global timescale, UTC, is based on the time told by a constellation of caesium clocks (and incidentally so is t he definition of a second as just over 9 billion caesium ticks), it is thought that when the Consultative Committee for Time and Frequency at the Bureau International DES Poids et Mesures (BIPM) next meets it will discuss whether to make these next generation of atomic clocks the new standard.

However, strontium clocks are not the only method of highly precise time. Last year a quantum clock, also developed at NIST managed accuracy of 1 second in 1 billion years. However, this type of clock can’t be directly monitored and requires a more complex scheme to monitor the time.

Next Generation of Accurate Atomic Clocks Starts Ticking – NIST scientists unveil new strontium clock is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

There are so many technologies that are reliant on atomic clocks and without many of the tasks we take for granted would be impossible. Air traffic control, satellite navigation and internet trading are just a few of the applications that are reliant on the ultra precise chronometry of an atomic clock.

Exactly what an atomic clock is, is often misunderstood. In simple terms an atomic clock is a device that uses the oscillations of atoms at different energy states to count ticks between seconds. Currently caesium is the preferred atom because it has over 9 billion ticks every second and because these oscillations never change it makes them a highly accurate method of keeping time.

Atomic clocks despite what many people claim are only ever found in large scale physics laboratories such as NPL (UK National Physical Laboratory) and NIST (US National Institute of Standards and Time). Often people suggest they have an atomic clock that controls their computer network or that they have an atomic clock on their wall. This is not true and what people are referring to is that they have a clock or time server that receives the time from an atomic clock.

Devices like the NTP time server often receive atomic clock signals form places such as NIST or NPL via long wave radio. Another method for receiving time from atomic clocks is using the GPS network (Global Positioning System).

The GPS network and satellite navigation are in fact a good example of why atomic clock synchonization is much needed with such high level of accuracy. Modern atomic clocks such as those found at NIST, NPL and inside orbiting GPS satellites are accurate to within a second every 100 million years or so. This accuracy is crucial when you examine how something like a cars GPS satellite navigation system works.

A GPS system works by triangulating the time signals sent from three or more separate GPS satellites and their onboard atomic clocks. Because these signals travel at the speed of light (nearly 100,000km a second) an inaccuracy of even one whole millisecond could put the navigational information out by 100 kilometres.

This high level of accuracy is also required for technologies such as air traffic control ensuring our crowded skies remain safe and is even critical for many Internet transactions such as trading in derivatives where the value can rise and fall every second.

The Importance of the Atomic Clock is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

The protocol NTP (Network Time Protocol) is the industry standard for time synchronisation. NTP distributes a single time source to an entire network ensuring all machines are running the exact same time.

One of the most problematic areas in synchronising a network is in the selection of the time source. Obviously if you are spending time getting a network synchronised then the time source would have to be a UTC (Coordinated Universal Time) as this is the global timescale used by computer networks all over the world.

UTC is available across the internet of course but internet time sources are not only notoriously inaccurate but using the internet as a time source will leave  computer system open to security threats as the source is external to the firewall.

A far better and secure method is to use a dedicated NTP time server. The NTP server sits inside the firewall and can receive a secure time signal from highly accurate sources. The most commonly used these days is the GPS network (Global Positioning System) this is because the GPS system is available literally anywhere on the planet. Unfortunately it does require a clear view of the sky to ensure the GPS NTP server can ‘see’ the satellite.

There is another alternative however, and that is to use the national time and frequency transmissions broadcast by several national physics laboratories. These have the advantage in that being long wave signals they can be received indoors. Although it must be noted these signals are not broadcast in every country and the range is finite and susceptible to interference and geographical features.

Some of the main transmissions broadcast are known as: the UK’s MSF signal, Germany’s DCF-77 and the USA’s WWVB.

Using Time and Frequency Transmissions to Synchronise a Computer Network is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.

However, thanks to the development of the atomic clock it has now been realised that even the Earth in its rotation is not as accurate a measure of time as the atomic clock as it loses or gains a fraction of a second each day.

Because of the need to have a timescale based somewhat on the Earth’s rotation (astronomy and farming being two reasons) a timescale that is kept by atomic clocks but adjusted for any slowing (or acceleration) in the Earth’s spin. This timescale is known as UTC (Coordinated Universal Time) as employed across the globe ensuring commerce and trade utilise the same time.

Computer networks use network time servers to synchronise to UTC time. Many people refer to these time server devices as atomic clocks but that is inaccurate. Atomic clocks are extremely expensive and highly sensitive pieces of equipment and are only usually to be found in universities or national physics laboratories.

Fortunately national physics laboratories like NIST (National Institute for Standards and Time – USA) and NPL (National Physical Laboratory – UK) broadcast the time signal from their atomic clocks. Alternatively the GPS network is another good source of accurate time as each GPS satellite has onboard its own atomic clock.

The network time server receives the time from an atomic clock and distributes it using a protocol such as NTP (Network Time Protocol) ensuring the computer network is synchronised to the same time.

Because network time servers are controlled by atomic clocks they can keep incredibly accurate time; not losing a second in hundreds if not thousands of years. This ensures that the computer network is both secure and unsusceptible to timing errors as all machines will have the exact same time.

The Atomic Clock and the Network Time Server is a post from: Galleon Systems written by Richard N Williams - About the Author: Richard N Williams is a technical author and a specialist in the telecommunications and network time synchronisation industry helping to develop dedicated NTP clocks. Please visit us for more information about NTP or other network time server solutions.